|
|
VISTA-20P |
|
|
|
|
|
|
|
The high capacity, feature-rich VISTA-20P lets you deliver
more value to your customers on each and every sale with
up to 48 zones of protection, Internet uploading/downloading,
graphic keypad support and dual partitions. VISTA-20P gives
you the ability to send alarm signals and upload/download via
an Internet Protocol (IP), improving the speed at which
information can be delivered to and from the control panel.
In addition, the VISTA-20P, used with an AlarmNet Internet
or digital communicator can be installed in premises without
TELCO lines with no sacrifice in functionality. The panel’s
installation advantages, innovative end-user benefits and
robust system capacity make the value-priced VISTA-20P
an ideal choice for higher end installations. Features
- IP alarm reporting and
uploading/downloading capability
for Internet and Intranet use via
7845i, 7845i-ENT, 7845GSMR
or 7845i-GSM
- Supports four graphic
touchscreen keypads
- Wireless keys can be programmed
without using zones
- Eight on-board hardwired zones
standard (15 when Zone Doubling
feature is used)
– 40 hardwire expansion zones
– 40 wireless expansion zones
- Two low current on-board
trigger outputs
- 100 Event Log viewable at system
keypads with time/date stamp
- 48 system user codes assignable to
either partition
- Expandable to 48 total zones when
used with hardwired and/or wireless
expansion modules
- Two independent partitions plus a
common partition
– Global Arming from any
system keypad
– Goto function to view or operate
one partition from the other
– Separate partition account numbers
- 16 output devices
– Relays (Model 4204 Relay Modules,
or 4229 Expansion Module), and/or
X-10® devices (when used with a 4300
Transformer)
- Four installer-configurable zone
types allows the installer to create
custom zone types by assigning
all zone attributes
- Supports four-wire and up to
16 two-wire smokes
– Works with Sentrol CleanMe™
maintenance signal
- Multiple actions on output devices
depending on system state
– Turns lights off when system arms
– Turns the same light on
when system disarms
– Flashes same lights when system
is in alarm
- Built-in phone line cut monitor
with programmable delay and
annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell
Security Dealer Features
- Automatic System Load Shed
– During extended AC power fail,
the system battery will be
disconnected to prevent irreversible
battery failure. Reduces service
calls to replace batteries.
- Dynamic Signaling
– Reduces redundant reporting to
the central station when multiple
reporting methods are used; i.e. digital
dialer and AlarmNet radio
Valuable End-User Features
- Viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log*
- Auto keypad backlighting on entry
- Keyswitch arming
- Programmable macro buttons and
single-button arming
- Supports a variety of wireless remote
controls for single-button operation
- User Scheduling
– Automatically activates X-10 and
relays at programmed times
– Latchkey reports to pagers
– Auto arm/disarm
– “User access” time windows
- Supports up to four end-user
numeric pagers
- VIP Module allows system control
from any touchtone phone
- Chime by zone
* Requires custom alpha keypad
|
|
|
|
|
|
|
|
